Fall — How Measured for Irrigation
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Incorrect Fall
Fall is the change in elevation along a defined direction. An incorrect fall can include a reversal, an insufficient gradient or a gradient that differs from the design.
Before moving material
Identify the start and end points, distance and elevation reference.
Receiving operation and checks
Measure the corrected profile independently. Check intermediate points because correct end levels can still hide a local dip.
There is no universal drainage fall appropriate to every project.
Read the complete Incorrect Fall guidePoor Irrigation Surface
An irrigation surface can be poor because of inlet mismatch, local depressions or altered field grade. The correction should follow water observations and measured levels.
Before moving material
Record water movement and survey supply, outlet and field features.
Receiving operation and checks
Recheck levels and observe the next controlled irrigation. Check corners, row ends and the far end of the field.
Grading alone cannot correct an unsuitable water-delivery arrangement.
Read the complete Poor Irrigation Surface guideIrrigation Grade Design
Irrigation grade design starts with the method of applying water and the field's soil and supply conditions. Minimising unnecessary soil movement is one consideration alongside water distribution.
Before moving material
Survey the field with inlet and outlet structures.
Receiving operation and checks
Check the formed field and its operating behaviour. Record levels and water observations together.
A single published slope cannot replace site-specific irrigation design.
Read the complete Irrigation Grade Design guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group