Elevation Control — Pad Use

Precision Grade Control

Precision grade control is the stage where a reference system is commissioned for the intended surface. It needs design transfer and equipment checks before productive grading.

Before moving material

Confirm design revision, datum and the working-edge reference.

Receiving operation and checks

Verify surface results independently during and after the work. Record calibration and any reference interruptions.

Machine guidance is not acceptance certification.

Elevation Control

Elevation control keeps a working edge or surface related to an agreed height reference. The relevant height belongs to the cutting or placement task, not merely the receiver or tractor.

Before moving material

Establish a reliable reference and identify offsets.

Receiving operation and checks

Verify the formed surface independently. Recheck after equipment adjustments or movement of reference equipment.

A correct instrument reading does not alone prove the finished material is suitable.

Building Pad Surface Handover

A building-pad handover must identify the formation, level reference and evidence for the intended foundation work. Geometry and material suitability are separate acceptance questions.

Before moving material

Obtain the structural and civil requirements for the pad.

Receiving operation and checks

Provide the builder with accepted level and material records. Check thresholds and surrounding runoff as well as the pad surface.

This guide does not establish bearing capacity or certify engineered fill.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology