Grade Sensor — Machine Compatibility
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Precision Grade Control
Precision grade control is the stage where a reference system is commissioned for the intended surface. It needs design transfer and equipment checks before productive grading.
Before moving material
Confirm design revision, datum and the working-edge reference.
Receiving operation and checks
Verify surface results independently during and after the work. Record calibration and any reference interruptions.
Machine guidance is not acceptance certification.
Read the complete Precision Grade Control guideTransport Lockouts and Machine State
Transport lockouts and parked-machine arrangements should follow the supplied machine instructions. A hydraulic control position should not be treated as an unspecified mechanical transport restraint.
Before moving material
Identify the actual locking and isolation arrangements.
Receiving operation and checks
Use the transport company's agreed loading and restraint process. Check that the machine is in its specified transport state.
This guide does not design a restraint system or replace the machine manual.
Read the complete Transport Lockouts and Machine State guideCut, Collect, Carry, Place & Grade
Cutting, collecting, carrying, placing and grading are different tasks. A machine that drags material forward does not necessarily carry a contained load to a distant low area. Break the earthworks into these actions so the route, implement and checking method match the actual work.
Before moving material
Survey high areas, receiving areas and obstacles before loading.
Receiving operation and checks
Recheck levels before another layer or another operation covers the work. Track the destination of material as well as the appearance of the cut.
Material suitability, safe towing and compaction requirements remain separate decisions.
Read the complete Cut, Collect, Carry, Place & Grade guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group