Find Your Application
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
How Far Does Your Dirt Need to Move?
Haul distance is the distance material must travel from a cut to its actual receiving area. Straight-line map distance can understate the cycle when access, turns and unloading routes matter. Longer hauls increase travel time even when loading capacity is unchanged.
Before moving material
Locate cut and fill areas and inspect the permitted traffic route.
Receiving operation and checks
Choose local balancing, staged stockpiles or another haul method where the route demands it. Use a timed trial with realistic loads and ground conditions.
A theoretical loads-per-hour figure is an operating assumption, not a guaranteed production rate.
Read the complete How Far Does Your Dirt Need to Move? guideGlobal Land Grading Knowledge Centre
The knowledge centre connects four decisions: the finished purpose, the problem stopping it, the work needed to correct it, and the equipment that can perform that work. Start with the symptom or project rather than a machine name when the cause is uncertain.
Before moving material
Choose a design, application or equipment pathway.
Receiving operation and checks
Take a clear project brief to the person arranging design or rental. Compare the selected guide with the actual site conditions.
Country or town names do not establish a local branch, completed project or available rental machine.
Read the complete Global Land Grading Knowledge Centre guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group